Beeville, Texas · field elev 184 ft
Density Altitude at Chase Field Industrial (TX2)
Chase Field Industrial sits at 184 ft, and even a typical August afternoon (96 °F) only lifts density altitude to about 2,558 ft — heat still trims performance, but the field rarely turns high-and-hot.
Typical density altitude by month
| Month | Avg temp °F | DA at avg temp | Afternoon high °F | DA on a typical afternoon |
|---|---|---|---|---|
| January | 54.6 | −45 ft | 65.5 | 670 ft |
| February | 58.2 | 193 ft | 69.0 | 895 ft |
| March | 64.2 | 585 ft | 74.6 | 1,252 ft |
| April | 70.2 | 972 ft | 80.7 | 1,636 ft |
| May | 77.1 | 1,411 ft | 86.8 | 2,015 ft |
| June | 82.1 | 1,724 ft | 91.9 | 2,328 ft |
| July | 83.6 | 1,817 ft | 93.8 | 2,443 ft |
| August | 84.5 | 1,873 ft | 95.7 | 2,558 ft |
| September | 80.0 | 1,593 ft | 90.4 | 2,236 ft |
| October | 72.7 | 1,132 ft | 84.1 | 1,848 ft |
| November | 63.7 | 553 ft | 74.9 | 1,271 ft |
| December | 56.3 | 67 ft | 67.2 | 779 ft |
▲ above 5,000 ft · ⚠ above 8,000 ft. These are planning references at standard pressure and dry air — afternoon humidity and low pressure both push the real number higher. Run today's values below.
Run today’s numbers for TX2
DENSITY ALTITUDE
Field elevation 184 ft — the air behaves like 2,576 ft.
- PRESSURE ALT
- 185 ft
- ISA DEVIATION
- —
- RULE-OF-THUMB DA
- —
- AIR DENSITY INDEX
- —
- AIR DENSITY
- —
- WATER · GRAINS/LB
- —
For training and reference · verify with official sources and your POH before flight · no tool on this site renders a go / no-go judgment
Nearby Texas fields
- KBEA — Beeville Municipal
Beeville · elev 273 ft
- KRFG — Rooke Field
Refugio · elev 54 ft
- T69 — Sinton
Sinton · elev 48 ft
- 8T6 — Live Oak County
George West · elev 129 ft
- 2R9 — Kenedy Regional
Kenedy · elev 289 ft
- 9R5 — Hunt
Portland · elev 38 ft
- KRBO — Nueces County
Robstown · elev 80 ft
- 67T — Old Hoppe Place
Agua Dulce · elev 96 ft
Frequently asked questions
How high does density altitude get at TX2 in summer?
On a typical August afternoon — around 96 °F at the nearest NOAA normals station — density altitude at Chase Field Industrial reaches roughly 2,558 ft at standard pressure. Hotter-than-normal days, low pressure, and humidity all push it higher, so run the day's actual numbers before flying.
What is the density altitude at TX2 on an average day?
It swings with the seasons: from roughly −45 ft at the coldest month's average temperature to about 1,873 ft at the warmest month's — all from a constant field elevation of 184 ft. The month-by-month table above carries the full year.
What is the field elevation of Chase Field Industrial?
184 ft MSL, from the FAA NASR airport record (28-day cycle effective 2026-08-06). The identifier is TX2 (FAA), in Beeville, Texas.